Bandsaw re-sawing

I found this article very helpful and wanted to share with you.
If you want the entire article, just follow the link. Has great how to pictures and a wealth of information on re-sawing..


Bandsaw Resawing
By George Vondriska

Cut logs into lumber, make thin boards from thick and cut your own veneer.

Perhaps you want to cut 3/4-in.-thick material down to 3/8 in., or make veneer from that one precious figured board. Or maybe you want to get useful lumber from a gorgeous piece of wood in your firewood pile. The technique that makes this possible is resawing.

Although it just plain baffles some woodworkers, once you get the hang of it, you’ll be surprised at what you can do, even on a small bandsaw. Here’s what you need to make it all happen: blade selection, shop-made jigs, setup and cutting tips.

Why Resaw?
One big reason: money. If you want thin stock for small boxes or drawers, it’s a lot cheaper to make your own than to buy it. Some wood dealers actually make thin stock by planing down 4/4 material, so it ends up being more expensive to buy less wood!

With wood prices going through the roof, making veneer can stretch your woodworking dollars. Slicing veneer on your bandsaw can change one bd. ft. of precious, expensive wood into six sq. ft. of veneer.

You can also transform those dusty chunks of apple or crotch wood out in your garage into free lumber by resawing. You could make a project entirely from a tree felled in your own yard. Resawing gives you access to the marvelous possibilities of free or cheap local logs.